Canon ME20F-SHN Network Operation Manual page 74

[Last Sync Time]
The time last synchronized with the specified NTP server will be displayed.
[Synchronize with computer time]
The date and time will be synchronized with that of the computer currently accessing the camera. After clicking [Apply],
[Settings Method] will change to [Set manually].
[Time Zone] is not automatically selected, so set it if necessary.
Note
If the NTP server IP address is incorrect or a connection with the NTP server cannot otherwise be established, [Last Sync Time] will not be
updated, or will be blank.
[Time Zone]
Select the appropriate time zone.
When the time zone is changed and [Apply] is selected, the date and time will be automatically changed based on the
selected time zone.
[Daylight Saving Time]
Select whether to automatically adjust for daylight saving time to suit the time zone.
74