Changing/Deleting A Privacy Mask - Canon ME20F-SHN Network Operation Manual

Set the size and position for the preview frame in the video display area.
2
Drag the preview frame shown in the video display area to the position you want to mask.
Change the size of the preview frame by dragging the handles () positioned on its four sides.
Set [Mask area] to [Enable].
3
The settings for the privacy mask area is enabled.
Set [Mask area] to [Disable] to temporarily disable a privacy mask area without deleting it. The disabled privacy
mask area of the registration area will be displayed with a crossed out frame.
4 Change the color for the privacy mask area with [Color] as necessary.
The color selected here is reflected to all the preview frames and privacy mask areas.
To add privacy mask areas, repeat steps 1 to 4.
5
You can save up to eight privacy masks.
Click [Apply].
6
The privacy mask area is saved to the camera.
Saved privacy mask areas are shown in the video display area and the privacy mask registration area.
Important
• You will need to set the position of the privacy mask again if you change the [Scan Reverse] setting in [Basic] > [System] >
[Installation Conditions].
• You will need to set the position of the privacy mask again if you change the zoom position.

Changing/Deleting a Privacy Mask


Privacy Mask Registration Area
This shows the positions of privacy mask areas in the entire area that can be captured by the camera.
Privacy Mask Registration Area
Preview Frame
Area Number
Privacy Mask Area
4
97