[Camera] > [Preset] Registering Presets; Registering A Preset - Canon ME20F-SHN Network Operation Manual

[Camera] > [Preset]
Registering Presets
By registering settings as presets, such as camera angles and camera settings (e.g. exposure), the presets can be easily
called up by Viewers to apply the settings.
Important
• Reconfigure the presets if you change the [Basic] > [System] > [Installation Conditions] > [Scan Reverse] (P. 79) settings.
• Reconfigure the presets if you change the zoom position.

Using Presets
In addition to immediate execution of registered camera angles and the camera settings such as exposure when
operating the viewer, you can execute the presets during switches between the normal capture and infrared modes
(P. 134) or at the start time of the timer event (P. 109).

Registering a Preset

The camera angle and camera settings can be registered as a preset.
The number of presets you can register are 21 at maximum (including the home position).
1 Operate the video display area and full-view screen to set the angle you want to register as the preset.
The preview frame (blue) indicates the position currently cropped into the video display area.
Video Display Area
The following settings can be configured here.
• Register Preset
Full-View Screen
Preview Frame
4
89