Restoring Factory Default Settings; Restoring The Initial Settings From A Web Browser; Restoring Factory Default Settings With The Reset Switch On The Camera - Canon ME20F-SHN Network Operation Manual

Restoring Factory Default Settings

If you have forgotten the settings and want to set the camera from the beginning, restore the factory default settings first.
It is recommended that you use [Maintenance] > [Backup / Restore] on the Setting Page to create a backup file before
restoring the factory default settings (P. 151).
Important
If you restore default settings, you will become unable to connect to the camera because the administrator account is also initialized. Use
the Camera Management Tool to configure the initial settings.
Note
• Settings can also be backed up using the Camera Management Tool. For details on using the Camera Management Tool, please refer to
"Camera Management Tool User Manual".
• For factory default settings, please refer to P. 174.

Restoring the Initial Settings from a Web Browser

Use [Maintenance] > [General] > [Initialization] > [Network Settings] > [Do not save] on the Setting Page (P. 149).

Restoring Factory Default Settings with the Reset Switch on the Camera

If you have forgotten or do not know the IP address of the camera or your Administrator password, you cannot operate the
camera via the network. In this case, press the reset switch to reset the camera.
For information on how to initialize the camera using the reset switch on the camera, please refer to "Setup Guide".
5
173