Canon ME20F-SHN Network Operation Manual page 85

[Auto]
Automatically sets the ND filter.
[Manual]
You can select a setting value for [ND Filter].
[ND Filter]
If [ND Mode] is set to [Manual], you can select a setting value.
There are two options for the ND filter: [1/8] (3 stops) and [1/64] (6 stops).
Important
Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom white balance may be effective
in such case (P. 83).
[Light Metering]
Select the light metering mode from three options to match the shooting conditions. Using the appropriate setting will
produce a suitable exposure level during automatic exposure (with [Infrared] set to [Disable]).
[Standard]
Averages the light metered from the entire screen, giving more weight to the subject in the center.
[Backlight]
Suitable when shooting backlit scenes.
[Spotlight]
Use this option when shooting a scene in which only a certain part of the picture is lit, for example, when the subject is lit
by a spotlight.
Important
When the camera mode is set to [Manual], changing the light metering mode will not affect the exposure. Adjust the exposure to a
suitable level.
[Flicker Reduction]
Allows the camera to automatically detect and correct flicker caused by artificial light sources. When set to [Enable], it may
be possible to automatically detect and compensate for the flicker.
[Custom Picture]
The camera lets you change several setting that control various aspects of the image produced. As a set, all these settings
are treated as a single custom picture file. After adjusting the desired settings to your preference, you can save up to four
custom picture files in the camera and load them later to apply exactly the same settings. Alternatively, you can use one of
the preset custom picture files.
The following preset custom picture files are protected and cannot be edited.
Preset Name Gamma
EOS Std. EOS Std.
Wide DR Wide DR
Canon Log Canon Log
Crisp Img Crisp Img
Blue Scr Normal 1
Reproduces the image quality and look (vivid, sharp and crisp) of an EOS
digital SLR camera with its picture style set to [Standard].
Applies a gamma curve with a very wide dynamic range and an appropriate
color matrix that nevertheless do not require post-production processing.
Uses the Canon Log gamma and color matrix for an outstanding dynamic
range and an image suitable for processing in post-production.
Under sufficient light conditions, video becomes clear with high sharpness
applied. Under low-light conditions, the data size can be reduced by setting
the noise reduction to a high level. Setting suitable for transmitting the video
over the network.
Displayed only when [Blue Scr] is specified for a custom picture file using the
buttons on the back of the camera.
A setting that optimizes the color correction for chroma key systems (blue
screen) that use LED lights and retroreflective backdrops. It can also be used
for chroma key shooting with common blue backdrops.
Feature
4
85