Canon ME20F-SHN Network Operation Manual page 164

H201 Timeout disconnect [warning]
Description
%1
%d
Meaning

wvhttp warning
W101 Invalid user name [notice]
Description
Meaning
W102 Invalid password [notice]
Description
Meaning
W130 Buffer recovered [notice]
Description
Meaning
W201 Invalid panorama image [warning]
Description
Meaning
W230 Buffer overflow [warning]
Description
Meaning

Audio server warning
B101 Received unusual request [notice]
Description
%1
%2
Meaning
164
a request for %1 timed out after writing
%d seconds (H201)
Request URI
360 (Timeout time)
Disconnected due to HTTP server
timeout (360 sec.).
user <User name> not found (W101)
The camera was accessed by an
unauthorized user.
user <User name> password
mismatch (W102)
The password is invalid.
stream buffer recovered (W130)
Image buffer for stream recording has
recovered.
corrupt panorama image - ignored
(W201)
Panorama image information
acquisition failed.
stream buffer overflowed (W230)
The image buffer for the stream
recording overflowed and images were
discarded.
%1 unusual request[%2] (B101)
Client host's IP address
Unusual type (400 | 404)
Refused due to command error (400)
and parameter error (404).
B102 Client connection denied [notice]
Description %1 request denied[%2] (B102)
%1 Client host IP address
%2 Denial type (41 | 43 | ...)
Meaning Client connection was denied due to
an authentication error (41), time
specification error (42), insufficient
resource (43), specification of
unsupported codec (45), specification
of unpermitted user level (47), too
many clients (49) or invalid operation
mode (4a).
Countermeasure 41: Check user name, password or
user list used when connecting.
42: Check playtime or maximum
connection time settings used when
connecting.
43: Reconnect or restart.
45: Use supported client software.
47: Check user level used when
connecting.
49: Check client number settings.
4a: Check if usage of audio server is
enabled.
B103 Client forcibly disconnected [notice]
Description %1 access denied[%2] (B103)
%1 Client host IP address
%2 Denial type (41 | 42 | 4a)
Meaning Connection was initially permitted, but
the setting has subsequently been
changed to prohibit access, thereby
triggering a forced disconnection (the
denial type is the same with B102).
B201 Event notification failure [warning]
Description cannot notify %1 event [%2] (B201)
%1 Event type (ald)
%2 Error number
Meaning Failed to notify event.
B202 Event receive failure [warning]
Description cannot recv event [%1] (B202)
%1 Error number
Meaning Failed to receive event.
B203 Audio message send failure [warning]
Description audio message send error %1 [%2]
(B203)
%1 Message type
%2 Error number
Meaning Failed to send audio message.