Canon ME20F-SHN Network Operation Manual page 90

Set the items of preset registration.
2
[Digital PTZ Position]
Select [Register] to register the current camera angle as a preset.
Note
If you selected [Home] (home position) in the preset list, [Digital PTZ Position] is always registered.
[Camera Settings]
Select [Register] to register the current settings in [Camera] > [Camera Settings] as a preset.
[Preset Name]
Enter a preset name. Be sure to enter a preset name in [Preset Name].
[Show in Viewers]
Select [Enable] to allow the Camera Viewers to use the preset.
Click [Add].
3
To register multiple presets, repeat steps 1 – 3.
4
When you select the added preset, the registered position is displayed as a preset preview frame (white frame) in
the full-view screen.
If you click [Preview], the preset currently selected is also displayed in the video display area.
Click [Apply].
5
The preset is saved in the camera.
Note
Click [Clear] to discard the settings and restore the settings saved in the camera. However, note that presets only registered to the
preset list by clicking [Add] are all discarded.

Deleting a Preset
Select the preset to delete in the preset list, and click [Delete]. Click [Apply] to delete the preset from the camera.
[Home] (home position) cannot be deleted.

Previewing a Preset
Select a preset in the preset list, and click [Preview]. The preset settings are shown in the video display area.

Checking Advanced Preset Information
Displays the information of the presets registered in the camera.
Select the preset to check the advanced information from the preset list, and click [Show Detailed Information].
90
Preview Frame
Preset Preview Frame