Canon ME20F-SHN Network Operation Manual page 116

Note
You can register up to 15 detection settings.
Click [OK].
3
The detection settings added to [Detection Settings] are displayed and [Enable these detection settings] is
selected.
Note
• To disable the detection settings, clear the [Enable these detection settings] checkbox.
• Enter the [Detection Settings Name] if necessary (P. 119).
• To delete detection area settings, select the detection area settings to delete and click [Delete] in Detection Settings (List).
Configure the detection criteria.
4
Set criteria in the video display area or [Detection Conditions] tab (P. 119). The detection criteria differ according
to the detection type.
Configure event settings.
5
Set which operations to carry out for video detection in the [Event] tab (P. 132).
To register multiple detection settings, repeat steps 1 to 5.
6
Click [Apply].
7
116