Checking The Status Of Event Detection; Operating External Device Output - Canon ME20F-SHN Network Operation Manual

Checking the Status of Event Detection

In the [Event and Input/Output] menu, you can operate the output of an external device and check the status of input of
the external device, and detection of intelligent functions.

Operating External Device Output

You can operate output for the external device set in [Event] > [External Device] (P. 107) on the Setting Page.
Click the icon to switch between the active (purple)/inactive (gray) status.
Example:
Output: Output active
Note
To operate [External Device Output] output, it is necessary to obtain camera control privileges.
Checking the Status of Event Detection
(1) [External Device Input]
Displays the input status of the external device set in [Event] > [External Device] (P. 107) on the Setting Page.
When a contact input signal is received from an external device, input will be activated and the icon becomes green.
Example:
Input: Input active
(1)
(2)
3
57