Canon ME20F-SHN Network Operation Manual page 66

66
• External Device (P. 107)
Event
• Timer (P. 109)
• Intelligent Function (P. 111)
• Infrared Switching (P. 134)
Security • User Management (P. 71)
• Host Access Restrictions (P. 135)
• SSL/TLS (P. 137)
• 802.1X (P. 140)
• IPsec (P. 142)
Memory Card (P. 146) Settings for recording video to a memory card when an event
is triggered.
The settings of this item are the same as those in [Video
Record] > [Memory Card]. Settings configured on one page
are also reflected on the other.
Maintenance • General (P. 149)
• Backup / Restore (P. 151)
• Update Firmware (P. 152)
• Log (P. 153)
User Page
Link to web page customized by the user.
For information on the User Page, contact a Canon Customer Service Center.
Operation settings for external device output and for
external device input triggered events.
The timer function can generate events that can trigger
operations, such as video recording, at regular intervals.
Configure the intelligent functions such as moving object
detection, camera tampering detection, and intrusion
detection.
The camera angle can be moved to preset positions when
normal capture and infrared are switched.
The settings of this item are the same as those of the [User
Management] in [Basic] menu. Settings configured on one
page are also reflected on the other.
Separate access control from IPv4 and IPv6 addresses
can be set.
Certificate creation and management, and encrypted
communication settings.
Settings for 802.1X authentication and authentication
status display, and for certificate management.
Settings for using IPsec.
Check the device information/settings, and licenses, and
reboot and initialize the device, etc.
Perform backup and restoration.
Perform firmware updates.
Display logs and configure log notification.