Steps For Setting Up The Camera; Step 1 Preparing To Install The Camera; Step 2 Setting Up The Camera; Step 3 Using The Camera Viewers - Canon ME20F-SHN Network Operation Manual

Steps for Setting Up the Camera

Step 1 Preparing to Install the Camera

Make preparations to use the camera via a network.
Connect the power supply/to the network.
 "Setup Guide"
Install the necessary software.
 "Installing Software" (P. 20)
Check/configure the computer and web browser security settings.
 "Checking/Configuring Security Settings" (P. 23)
Use the Camera Management Tool to configure initial camera settings.
 "Configuring Initial Camera Settings" (P. 27)

Step 2 Setting Up the Camera

Set up the camera to suit the environment it will be used in.
 "Setup Guide"

Step 3 Using the Camera Viewers

Operate the camera while viewing the video in the Viewer.
 "Camera Viewer" (P. 29)

Step 4 Adjusting Advanced Settings According to Its Use

Advanced settings can be made in the Settings Menu, such as
for camera control and security, according to how the camera
will be used.
Settings can also be made using the Camera Management Tool.
For details, please refer to "Camera Management Tool User
Manual".
 "Setting Page" (P. 59)
Camera Viewer
Setting Page
1
17