Canon ME20F-SHN Network Operation Manual page 36

(1) Video Display Area
Displays video received from the camera.
(2) [Reconnect] Button
Reconnects to the camera. Can be operated when the Viewer is not connected to the camera.
(3) [Full Screen Mode] Button
Video is displayed in full screen mode (P. 41).
(4) [Memory Card Recording] Button
Start and stop video recording to a memory card (P. 55).
(5) [Obtain/Release Camera Control Privileges] Button
Obtain and release the camera control privileges (P. 45).
(6) [Snapshot] Button
Open the snapshot panel and display a still image of the moment you clicked the button in the control display
area (P. 54).
(7) [Viewer PTZ] Button
Starts/stops the Viewer PTZ*. When started, the Viewer PTZ panel is shown in the control display area (P. 50).
*PTZ: pan/tilt/zoom
(8) [Digital PTZ] Button
Starts/stops the Digital PTZ. When started, the Digital PTZ panel is shown in the control display area (P. 51).
(9) [Close] Button
Closes the panels shown in the control display area.
(10) Snapshot Tab
Click this to switch the control display area to the snapshot panel (P. 54).
(11) Viewer PTZ/Digital PTZ Tab
Click this to switch the control display area to the Viewer PTZ/Digital PTZ panel (P. 50).
(12) Control Display Area
Click (10) or (11) to display the snapshot panel or Viewer PTZ/Digital PTZ panel.
36