Power (Mains) Connection; Power (Mains) Cord Connection; Fuses; Switching On - Barco BARCOVISION 8100 Owner's Manual

Power (mains) cord connection

Use the delivered power cord to connect your projector to the wall outlet. Plug the female
power connector into the male connector at the front of the projector.
COMMUNICATION PORT
RS 232 IN (800-PERIPHERALS)
VGA-INPUT
The power input is auto-ranging from 100 to 240 VAC.
This projector may be connected to an IT-power system.

Fuses

Warning
For continued protection against fire hazard :
- replace with the same type of fuse.
- refer replacement to qualified service personnel
Fuse type : T12.5 AH/250V

Switching on

Use the power switch to switch on.
When '0' is visible, the projector is switched off.
When '1' is visible, the projector is switched on.
6-2
POWER CONNECTION
PROJECTOR MODE :
GREEN - OPERATION
RED - STANDBY
REMOTE
S-VIDEO VIDEO
MAC-INPUT VIDEO-INPUT DECODER
S-VIDEO VIDEO
100-240Vac
10-4.5A
5975617 BARCOVISION 8100 150197
Power (mains) cord connection
Use the delivered power cord to connect your projector to the wall outlet. Plug the female
power connector into the male connector at the front of the projector.
COMMUNICATION PORT
RS 232 IN (800-PERIPHERALS)
VGA-INPUT
The power input is auto-ranging from 100 to 240 VAC.
This projector may be connected to an IT-power system.
Fuses
Warning
For continued protection against fire hazard :
- replace with the same type of fuse.
- refer replacement to qualified service personnel
Fuse type : T12.5 AH/250V
Switching on
Use the power switch to switch on.
When '0' is visible, the projector is switched off.
When '1' is visible, the projector is switched on.
6-2
POWER CONNECTION
PROJECTOR MODE :
GREEN - OPERATION
RED - STANDBY
REMOTE
S-VIDEO VIDEO
MAC-INPUT VIDEO-INPUT DECODER
S-VIDEO VIDEO
100-240Vac
10-4.5A
5975617 BARCOVISION 8100 150197