How To Get A Summary Of Your Projector - Barco BARCOVISION 8100 Owner's Manual

will be also indicated on the menu by adding + 800 peripheral . If no 800 peripheral
indication is made on the menu, there are still two possibilities :
- no RCVDS or VS05 connected or
- RCVDS is switched off.
When a 800 peripheral is connected to the projector, the input slots are not accessible
with the up or down arrow key to toggle their function.
If an input slot is empty, the indication no module is added next to the corresponding
slot number in the input slots menu.
EXIT : returns to the System Settings menu.

HOW TO GET A SUMMARY OF YOUR PROJECTOR?

The Summary gives an overview of :
- type of projector
- soft version
- lamp run time
- projector run time
- address
- installation configuration
- baud rate
- projector serial number
- lamp serial number
To display the Summary on the screen,
press ENTER to start up the Main menu.
Push the joy stick key forward or back-
ward to highlight System Settings and
press ENTER to display the System
Settings menu.
Push the joy stick key forward or back-
ward to highlight Summary and press
ENTER . The summary will be displayed
on the screen.
The following information is displayed :
8-8
CONTROLLING
MAIN MENU
Picture Control
Audio Control
System Settings
File service
Service Mode
SYSTEM SETTINGS
832b
Lamp Control
Installation
Input slots
•
Summary
Color
5975617 BARCOVISION 8100 150197
it will be also indicated on the menu by adding + 800 peripheral . If no 800 peripheral
indication is made on the menu, there are still two possibilities :
- no RCVDS or VS05 connected or
- RCVDS is switched off.
When a 800 peripheral is connected to the projector, the input slots are not accessible
with the up or down arrow key to toggle their function.
If an input slot is empty, the indication no module is added next to the corresponding
slot number in the input slots menu.
EXIT : returns to the System Settings menu.
HOW TO GET A SUMMARY OF YOUR PROJECTOR?
The Summary gives an overview of :
- type of projector
- soft version
- lamp run time
- projector run time
- address
- installation configuration
- baud rate
- projector serial number
- lamp serial number
To display the Summary on the screen,
press ENTER to start up the Main menu.
Push the joy stick key forward or back-
ward to highlight System Settings and
press ENTER to display the System
Settings menu.
Push the joy stick key forward or back-
ward to highlight Summary and press
ENTER . The summary will be displayed
on the screen.
The following information is displayed :
8-8
CONTROLLING
MAIN MENU
Picture Control
Audio Control
System Settings
File service
Service Mode
SYSTEM SETTINGS
832b
Lamp Control
Installation
Input slots
•
Summary
Color
5975617 BARCOVISION 8100 150197