Appendix B : Battery Replacement In The Rcu - Barco BARCOVISION 8100 Owner's Manual

APPENDIX B : BATTERY REPLACEMENT IN THE RCU

BATTERY REPLACEMENT IN THE RCU.
Remove the battery cover on he backside of the remote
control by pushing the indicated handle a little to the
bottom of the RCU. Lift up the top side of the cover at the
same time.
(fig. 1)
Remove the battery from the compartment and discon-
nect the contact plate. (fig. 2)
Connect a new 9 V battery (E-block type, e.g. type 6F22S
or equivalent) to the contact plate.
Insert the battery back into the compartment.
Put the cover back.
Contact
plate
Battery
5975617 BARCOVISION 8100 150197
fig. 1
fig. 2
310a .DRW
B-1
APPENDIX B : BATTERY REPLACEMENT IN THE RCU
BATTERY REPLACEMENT IN THE RCU.
Remove the battery cover on he backside of the remote
control by pushing the indicated handle a little to the
bottom of the RCU. Lift up the top side of the cover at the
same time.
(fig. 1)
Remove the battery from the compartment and discon-
nect the contact plate. (fig. 2)
Connect a new 9 V battery (E-block type, e.g. type 6F22S
or equivalent) to the contact plate.
Insert the battery back into the compartment.
Put the cover back.
Contact
plate
Battery
5975617 BARCOVISION 8100 150197
fig. 1
fig. 2
310a .DRW
B-1