Table of Contents
Advertisement
SOURCE SET UP
Options
Source number : The source number
of a non-active source can be changed
to any other source number.
This
makes it possible to create already a
file for future source numbers.
Clamping : the clamping determines
the black level of the signal.
default setting : arrow up 1
Arrow up : trailing edge of the sync
pulse to start the clamp pulse.
Arrow down : leading edge of the sync
pulse to start the clamp pulse
1 : narrow clamp pulse
2 : wide clamp pulse
Field polarity inverted : default [No]
This function is used for interlaced images. Both rasters of the image could be
shifted in a wrong way (double lines are visible in the image). This can be corrected
by inverting the field polarity to [yes].
Vertical refresh [sync/Async] : The way of updating the image information on the LCD
panels. For moving images, the vertical refresh has to be done on a synchronous
way, for still images, asynchronous vertical refresh is possible.
Vertical sync polarity : Vertical refresh can be synchronised with the leading sync
edge [arrow down] or trailing sync edge [arrow up].
Press EXIT to leave the Edit File Option menu.
Press EXIT to leave the Edit menu. A confirmation menu will be displayed (only when
the file is opened as "Read/Write").
"Save changes to file "filename.ext" ?
yes or no.
Use the control stick key to select yes or no and press ENTER .
RENAME
To change the name of a selected file to
the name given in the TO area.
Use the control stick key to select RE-
NAME and press ENTER . The rename
menu will be displayed.
5975617 BARCOVISION 8100 150197
EDIT FILE OPTIONS
Source number
1
Clamping
[ 1]
Field polarity inverted
[no]
Vertical refresh
[sync]
Vertical sync polarity
[
]
858
FILE SERVICE
Load
Edit
Rename
Copy
Move
Delete
Options
847d
9-7
SOURCE SET UP
Options
Source number : The source number
of a non-active source can be changed
to any other source number.
This
makes it possible to create already a
file for future source numbers.
Clamping : the clamping determines
the black level of the signal.
default setting : arrow up 1
Arrow up : trailing edge of the sync
pulse to start the clamp pulse.
Arrow down : leading edge of the sync
pulse to start the clamp pulse
1 : narrow clamp pulse
2 : wide clamp pulse
Field polarity inverted : default [No]
This function is used for interlaced images. Both rasters of the image could be
shifted in a wrong way (double lines are visible in the image). This can be corrected
by inverting the field polarity to [yes].
Vertical refresh [sync/Async] : The way of updating the image information on the LCD
panels. For moving images, the vertical refresh has to be done on a synchronous
way, for still images, asynchronous vertical refresh is possible.
Vertical sync polarity : Vertical refresh can be synchronised with the leading sync
edge [arrow down] or trailing sync edge [arrow up].
Press EXIT to leave the Edit File Option menu.
Press EXIT to leave the Edit menu. A confirmation menu will be displayed (only when
the file is opened as "Read/Write").
"Save changes to file "filename.ext" ?
yes or no.
Use the control stick key to select yes or no and press ENTER .
RENAME
To change the name of a selected file to
the name given in the TO area.
Use the control stick key to select RE-
NAME and press ENTER . The rename
menu will be displayed.
5975617 BARCOVISION 8100 150197
EDIT FILE OPTIONS
Source number
1
Clamping
[ 1]
Field polarity inverted
[no]
Vertical refresh
[sync]
Vertical sync polarity
[
]
858
FILE SERVICE
Load
Edit
Rename
Copy
Move
Delete
Options
847d
9-7
Advertisement
Table of Contents
