How To Get Source Information - Barco BARCOVISION 8100 Owner's Manual

CONTROLLING
Main menu by pressing the ENTER
key.
Highlight System Settings the joy stick
key forward or backward and press
ENTER to select this option. The
system settings menu will be displayed
on the screen. Select Lamp Control
and press ENTER . The lamp control
menu will be displayed. Use the EN-
TER key to toggle the power mode
between [normal] and [high] or vice
versa. The other items give informa-
tion about the used voltage, the run
time of the lamp and the serial number
of the lamp.

HOW TO GET SOURCE INFORMATION?

The projector can give information about
its input configuration (inserted mod-
ules and 800 peripherals connection)
in a menu box.
To get this information, call the Main
menu by pressing the ENTER key.
Highlight System Settings by pushing
the joy stick key forward or backward
and press ENTER to select this option.
The System Settings menu will be dis-
played on the screen.
Highlight Input Slots by pushing the joy
stick key forward or backward and press
ENTER to select.
The projector's controller will scan the
input slots and displays the result in the
Input Slots menu.
Next to the digits you find the name of
input slots. The controller starts count-
ing from left to right when you are in
front of the projector and looking to the
lens.
If a RCVDS (switched on) or VS05 is
connected to the BARCOVISION 8100,
5975617 BARCOVISION 8100 150197
MAIN MENU
Picture Control
Audio Control
System Settings
File service
Service Mode
SYSTEM SETTINGS
Lamp Control
832b
Installation
Input slots
•
Summary
Color
LAMP CONTROL
Power [High]
Voltage (230V)
Run Time (50 h)
Serial Number (0123123)
883
MAIN MENU
Picture Control
Audio Control
System Settings
File service
Service Mode
832b
SYSTEM SETTINGS
Lamp Control
Installation
Input slots
•
Summary
Color
INPUT SLOTS
1. RGB-SS [CV]
2. RGB-SOG
3. Video/S-Video [Video]
•
4. Component video-SS
+ 800-peripheral
837
8-7
CONTROLLING
Main menu by pressing the ENTER
key.
Highlight System Settings the joy stick
key forward or backward and press
ENTER to select this option. The
system settings menu will be displayed
on the screen. Select Lamp Control
and press ENTER . The lamp control
menu will be displayed. Use the EN-
TER key to toggle the power mode
between [normal] and [high] or vice
versa. The other items give informa-
tion about the used voltage, the run
time of the lamp and the serial number
of the lamp.
HOW TO GET SOURCE INFORMATION?
The projector can give information about
its input configuration (inserted mod-
ules and 800 peripherals connection)
in a menu box.
To get this information, call the Main
menu by pressing the ENTER key.
Highlight System Settings by pushing
the joy stick key forward or backward
and press ENTER to select this option.
The System Settings menu will be dis-
played on the screen.
Highlight Input Slots by pushing the joy
stick key forward or backward and press
ENTER to select.
The projector's controller will scan the
input slots and displays the result in the
Input Slots menu.
Next to the digits you find the name of
input slots. The controller starts count-
ing from left to right when you are in
front of the projector and looking to the
lens.
If a RCVDS (switched on) or VS05 is
connected to the BARCOVISION 8100,
5975617 BARCOVISION 8100 150197
MAIN MENU
Picture Control
Audio Control
System Settings
File service
Service Mode
SYSTEM SETTINGS
Lamp Control
832b
Installation
Input slots
•
Summary
Color
LAMP CONTROL
Power [High]
Voltage (230V)
Run Time (50 h)
Serial Number (0123123)
883
MAIN MENU
Picture Control
Audio Control
System Settings
File service
Service Mode
832b
SYSTEM SETTINGS
Lamp Control
Installation
Input slots
•
Summary
Color
INPUT SLOTS
1. RGB-SS [CV]
2. RGB-SOG
3. Video/S-Video [Video]
•
4. Component video-SS
+ 800-peripheral
837
8-7