Copy - Barco BARCOVISION 8100 Owner's Manual

Use the control stick key to select a file
name in the left part of the menu and
press ENTER to select. This file name
will be written in the FROM area and the
TO area. The TO area is active.
Press ENTER to select the separate
characters. Push the control stick key to
the right or to the left to select the
desired character. Change that charac-
ters by pushing the control stick forward
or backward. Numeric characters can
be entered directly with numeric keys
on the RCU.
Press ENTER to select Ok.
Press ENTER for OK. The renamed file is entered in the list of files. Press EXIT to
leave the Rename menu.

COPY

To copy a selected file to the file with the
name and extension given in the TO
area.
Use the control stick to select COPY
and press ENTER . The copy menu will
be displayed.
Use the control stick to select a file in
the list of files in the left part of the menu
and press ENTER to select. This file
name will be written in the FROM area
and the base name of the selected file
in the TO area. The file index in the TO
area will be an unused file index. The
TO area becomes active. Press EN-
TER to select the separate characters.
Push the control stick key to the right or
to the left to select the desired charac-
ter. Change that characters by pushing
the control stick forward or backward
(digits can be entered directly using the
numeric keys).
Press ENTER to select Ok.
Press ENTER for OK. The copied file is entered in the list of files. Press EXIT to leave
the Copy menu (note : if the file index is changed to an existing index, a confirmation
menu will be displayed).
9-8
SOURCE SET UP
RENAME FILE
pal .s1
From :
pal .c50
......... c..
secam .s3
To
......... c..
pal .c50 OK
852
FILE SERVICE
Load
Edit
Rename
Copy
Move
Delete
Options
847e
COPY FILE
pal .s1
From :
pal .c50
......... c..
secam .s3
To
......... c..
pal .c50 OK
853
5975617 BARCOVISION 8100 150197
Use the control stick key to select a file
name in the left part of the menu and
press ENTER to select. This file name
will be written in the FROM area and the
TO area. The TO area is active.
Press ENTER to select the separate
characters. Push the control stick key to
the right or to the left to select the
desired character. Change that charac-
ters by pushing the control stick forward
or backward. Numeric characters can
be entered directly with numeric keys
on the RCU.
Press ENTER to select Ok.
Press ENTER for OK. The renamed file is entered in the list of files. Press EXIT to
leave the Rename menu.
COPY
To copy a selected file to the file with the
name and extension given in the TO
area.
Use the control stick to select COPY
and press ENTER . The copy menu will
be displayed.
Use the control stick to select a file in
the list of files in the left part of the menu
and press ENTER to select. This file
name will be written in the FROM area
and the base name of the selected file
in the TO area. The file index in the TO
area will be an unused file index. The
TO area becomes active. Press EN-
TER to select the separate characters.
Push the control stick key to the right or
to the left to select the desired charac-
ter. Change that characters by pushing
the control stick forward or backward
(digits can be entered directly using the
numeric keys).
Press ENTER to select Ok.
Press ENTER for OK. The copied file is entered in the list of files. Press EXIT to leave
the Copy menu (note : if the file index is changed to an existing index, a confirmation
menu will be displayed).
9-8
SOURCE SET UP
RENAME FILE
pal .s1
From :
pal .c50
......... c..
secam .s3
To
......... c..
pal .c50 OK
852
FILE SERVICE
Load
Edit
Rename
Copy
Move
Delete
Options
847e
COPY FILE
pal .s1
From :
pal .c50
......... c..
secam .s3
To
......... c..
pal .c50 OK
853
5975617 BARCOVISION 8100 150197