Table of Contents
Advertisement
* Slots and openings in the
cabinet and the back or bot-
tom are provided for venti-
lation; to ensure reliable op-
eration of the projector and
Air circulation
to protect it from overheat-
ing, these openings must
not be blocked or covered.
The openings should never
be blocked by placing the
product on a bed, sofa, rug,
or other similar surface.
This product should never be placed near or over a radiator or heat register. This
projector should not be placed in a built-in installation or enclosure unless proper
ventilation is provided.
* Do not block the BARCOVISION 8100 cooling fans or free air movement under and
around the BARCOVISION 8100. Loose papers or other objects may not be nearer to
the BARCOVISION 8100 than 4" on any side.
On Servicing
Do not attempt to service this projector yourself, as opening or removing covers may
expose you to dangerous voltage potential and risk of electric shock!
BARCOVISION 8100 service to a qualified BARCO service center.
Call for service in the following conditions :
When the power cord or plug is damaged or frayed.
- If liquid has been spilled into the projector.
- If the product has been exposed to rain or water.
- If the product does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions since improper
adjustment of the other controls may result in damage and will often require extensive
work by a qualified technician to restore the product to normal operation;
- If the product has been dropped or the cabinet has been damaged;
- If the product exhibits a distinct change in performance, indicating a need for service.
Replacement parts - When replacement parts are required, be sure the service
technician has used original BARCO replacement parts or authorized replacement parts
which have the same characteristics as the BARCO original part. Unauthorized substitu-
tions may result in degraded performance and reliability, fire, electric shock or other
hazards. Unauthorized substitutions may void warranty.
Safety check - Upon completion of any service or repairs to this projector, ask the service
technician to perform safety checks to determine that the projector is in proper operating
1-6
SAFETY INSTRUCTIONS
Surface
Build-in Dust filter
Refer all
5975617 BARCOVISION 8100 160197
* Slots and openings in the
cabinet and the back or bot-
tom are provided for venti-
lation; to ensure reliable op-
Air circulation
eration of the projector and
to protect it from overheat-
ing, these openings must
not be blocked or covered.
The openings should never
be blocked by placing the
product on a bed, sofa, rug,
or other similar surface.
a radiator or heat register. This
lation or enclosure unless proper
* Do not block the BARCOVISION 8100 cooling fans or free air movement under and
around the BARCOVISION 8100. Loose papers or other objects may not be nearer to
the BARCOVISION 8100 than 4" on any side.
On Servicing
Do not attempt to service this projector yourself, as opening or removing covers may
expose you to dangerous voltage potential and risk of electric shock!
BARCOVISION 8100 service to a qualified BARCO service center.
Call for service in the following conditions :
When the power cord or plug is damaged or frayed.
- If liquid has been spilled into the projector.
- If the product has been exposed to rain or water.
- If the product does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions since improper
adjustment of the other controls may result in damage and will often require extensive
work by a qualified technician to restore the product to normal operation;
- If the product has been dropped or the cabinet has been damaged;
- If the product exhibits a distinct change in performance, indicating a need for service.
Replacement parts - When replacement parts are required, be sure the service
technician has used original BARCO replacement parts or authorized replacement parts
which have the same characteristics as the BARCO original part. Unauthorized substitu-
tions may result in degraded performance and reliability, fire, electric shock or other
hazards. Unauthorized substitutions may void warranty.
Safety check - Upon completion of any service or repairs to this projector, ask the service
technician to perform safety checks to determine that the projector is in proper operating
1-6
SAFETY INSTRUCTIONS
Surface
Build-in Dust filter
This product should never be placed near or over
projector should not be placed in a built-in instal-
ventilation is provided.
Refer all
5975617 BARCOVISION 8100 160197
Advertisement
Table of Contents
