Start Up Of The Service Mode - Barco BARCOVISION 8100 Owner's Manual

SERVICE MODE

START UP OF THE SERVICE MODE.

When in operational mode, press EN-
TER to display the main menu.
Use the control stick key to highlight
Service mode and press ENTER .
If the password function is activated,
the Enter password box appears on
the screen.
Your password contains 4 digits. En-
ter the digits with the numeric keys on
the RCU or the local keypad.
Example : 2 3 1 9
For each digit entered, a 'X' appears
on the screen under the displayed text
'Enter password'
When the entered password is wrong,
the following message will be displayed
: Invalid Password .
Press EXIT to return to the main menu.
When your password is correct, you
get access to the Service menu.
Factory programmed password :
0000
5975617 BARCOVISION 8100 150197
MAIN MENU
Picture Control
System Settings
File service
Service Mode
832d
SERVICE MODE
PASSWORD
Enter Password : ----
Error
Invalid Password
SERVICE MODE
Modify Password
Reset Lamp Run Time
Lamp Run Time History
Convergence
Display Settings
Decoder Settings
Color Balance
I2C Device Test
878
11-3
SERVICE MODE
START UP OF THE SERVICE MODE.
When in operational mode, press EN-
TER to display the main menu.
Use the arrow keys to highlight Service
mode and press ENTER .
If the password function is activated,
the Enter password box appears on
the screen.
Your password contains 4 digits. En-
ter the digits with the numeric keys on
the RCU or the local keypad.
Example : 2 3 1 9
For each digit entered, a 'X' appears
on the screen under the displayed text
'Enter password'
When the entered password is wrong,
the following message will be displayed
: Invalid Password .
Press EXIT to return to the main menu.
When your password is correct, you
get access to the Service menu.
Factory programmed password :
0000
5975617 BARCOVISION 8100 150197
MAIN MENU
Picture Control
System Settings
File service
Service Mode
832d
SERVICE MODE
PASSWORD
Enter Password : ----
Error
Invalid Password
SERVICE MODE
Modify Password
Reset Lamp Run Time
Lamp Run Time History
Convergence
Display Settings
Decoder Settings
Color Balance
I2C Device Test
878
11-3