On Cleaning; On Repacking; On Illumination - Barco BARCOVISION 8100 Owner's Manual

SAFETY INSTRUCTIONS
condition.
The BARCOVISION 8100 uses a 575 W metal halide projection lamp. Replacing the
projection lamp with any other projection lamp can cause overheating or unacceptable
image quality. Use only the projection lamps specified by BARCO, or an authorized
BARCO dealer or service center.

On Cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
To keep the cabinet looking brand-new, periodically clean it with a soft cloth. Stubborn
stains may be removed with a cloth lightly dampened with mild detergent solution. Never
use strong solvents, such as thinner or benzine, or abrasive cleaners, since these will
damage the cabinet.
To ensure the highest optical performance and resolution, the projection lenses are
specially treated with an anti-reflective coating, therefore : avoid touching the lens. To
remove dust on the lens, use a soft dry cloth. Do not use a damp cloth, detergent solution,
or thinner. Follow the lens cleaning procedure on Appendix E

On Repacking

Save the original shipping carton and packing material; they will come in handy if you ever
have to ship your projector. For maximum protection, repack your set as it was originally
packed at the factory.

On illumination

In order to obtain the best quality for the projected image, it is essential that the ambient
light which is allowed to fall on the screen be kept to an absolute minimum.
When installing the projector and screen, care must be taken to avoid exposure to ambient
light directly on the screen. Avoid adverse illumination on the screen from direct sunlight
or fluorescent lighting fixtures.
The use of controlled ambient lighting, such as incandescent spot light or a dimmer, is
recommended for proper room illumination. Where possible, care should also be taken
to ensure that the floors and walls of the room in which the projector is to be installed are
non-reflecting, dark surfaces. Brighter surfaces will tend to reflect and diffuse the ambient
light and hence reduce the contrast of the projected image on the screen.
5975617 BARCOVISION 8100 160197
SAFETY INSTRUCTIONS
condition.
The BARCOVISION 8100 uses a 575 W metal halide projection lamp. Replacing the
projection lamp with any other projection lamp can cause overheating or unacceptable
image quality. Use only the projection lamps specified by BARCO, or an authorized
BARCO dealer or service center.
On Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
To keep the cabinet looking brand-new, periodically clean it with a soft cloth. Stubborn
stains may be removed with a cloth lightly dampened with mild detergent solution. Never
use strong solvents, such as thinner or benzine, or abrasive cleaners, since these will
damage the cabinet.
To ensure the highest optical performance and resolution, the projection lenses are
specially treated with an anti-reflective coating, therefore : avoid touching the lens. To
remove dust on the lens, use a soft dry cloth. Do not use a damp cloth, detergent solution,
or thinner. Follow the lens cleaning procedure on Appendix E
On Repacking
Save the original shipping carton and packing material; they will come in handy if you ever
have to ship your projector. For maximum protection, repack your set as it was originally
packed at the factory.
On illumination
In order to obtain the best quality for the projected image, it is essential that the ambient
light which is allowed to fall on the screen be kept to an absolute minimum.
When installing the projector and screen, care must be taken to avoid exposure to ambient
light directly on the screen. Avoid adverse illumination on the screen from direct sunlight
or fluorescent lighting fixtures.
The use of controlled ambient lighting, such as incandescent spot light or a dimmer, is
recommended for proper room illumination. Where possible, care should also be taken
to ensure that the floors and walls of the room in which the projector is to be installed are
non-reflecting, dark surfaces. Brighter surfaces will tend to reflect and diffuse the ambient
light and hence reduce the contrast of the projected image on the screen.
1-7 5975617 BARCOVISION 8100 160197
1-7