Video Offset; Gain; Gain Adjustment Per Color - Barco BARCOVISION 8100 Owner's Manual

PICTURE CONTROL IN ADJUSTMENT MODE

Video offset

Default value : 100
To adjust the Video offset, be sure the
contrast level is adjusted to maximum
(bar scale value = 64) (brightness set-
ting has no influence) and the color
saturation is set to zero (for video).
When possible use a grey scale test
pattern. Adjust until the second last bar
(dark grey) is distinguishable from the
last bar (black).

Gain

Default value : 200
To adjust the Gain, be sure the contrast
level is adjusted to maximum (bar scale
value = 64). When possible use a grey
scale test pattern. Adjust until the first
white bar is distinguishable from the
second white bar.

Gain adjustment per color

If the obtained color balance is not yet
correct, adjust with the separate gain
controls until the desired color balance
is obtained.
5975617 BARCOVISION 8100 150197
PICTURE CONTROL IN ADJUSTMENT MODE
Video offset
Default value : 100
To adjust the Video offset, be sure the
contrast level is adjusted to maximum
(bar scale value = 64) (brightness set-
ting has no influence) and the color
saturation is set to zero (for video).
When possible use a grey scale test
pattern. Adjust until the second last bar
(dark grey) is distinguishable from the
last bar (black).
861
Gain
Default value : 200
To adjust the Gain, be sure the contrast
level is adjusted to maximum (bar scale
value = 64). When possible use a grey
scale test pattern. Adjust until the first
white bar is distinguishable from the
second white bar.
861
Gain adjustment per color
If the obtained color balance is not yet
correct, adjust with the separate gain
controls until the desired color balance
is obtained.
10-3 5975617 BARCOVISION 8100 150197
861
861
10-3