Saving Of Received Faxes - Epson WorkForce Pro WF-4720 series User Manual

User's Guide
2. Tap .
3. Tap the Polling Receive box to set this to On.
4. Tap Close.
5. Enter the fax number.
Note:
When Direct Dialing Restrictions in Security Settings is enabled, you can only select fax recipients from the contact
list or the sent fax history. You cannot manually enter a fax number.
x
6. Tap .
Related Information
"Sending Faxes Dialing from the External Phone Device" on page 117
&
Making Settings for Blocking Junk Faxes
You can block junk faxes.
1. Tap Settings on the home screen.
2. Tap General Settings > Fax Settings > Basic Settings > Rejection Fax.
3. Tap Rejection Fax and then enable the following options.
❏ Rejection Number List: Reject faxes that are in the Rejection Number List.
❏ Fax Header Blank: Reject faxes that have blank header information.
❏ Unregistered Contacts: Reject fax that have not been registered in the contact list.
4. If you use the Rejection Number List, tap
Related Information
"Basic Settings" on page 133
&

Saving of Received Faxes

The printer provides the following features to save received faxes.
❏ Saving in the printer's inbox
❏ Saving in an external memory device
❏ Saving on a computer
Note:
❏ The above features can be used at the same time. If you do use them all at the same time, received documents are saved to
the inbox, to an external memory device, and on a computer.
❏ When there are received documents that have not been read or saved yet, the number of the unprocessed jobs is displayed
on the on the home screen.
Faxing
, and then tap Edit Blocked Number list and edit the list.
123