Running Web Config On A Web Browser; Running Web Config On Windows - Epson WorkForce Pro WF-4720 series User Manual

User's Guide

Running Web Config on a Web Browser

1. Check the printer's IP address.
Tap the network icon on the printer's home screen, and then tap the active connection method to confirm the
printer's IP address.
Note:
You can also check the IP address by printing the network connection report.
2. Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Config from the maintenance screen of Epson iPrint.
Related Information
"Using Epson iPrint" on page 80
&
"Printing a Network Connection Report" on page 33
&

Running Web Config on Windows

When connecting a computer to the printer using WSD, follow the steps below to run Web Config.
1. Access the devices and printers screen in Windows.
❏ Windows 10
Right-click the start button or press and hold it, and then select Control Panel > View devices and printers
in Hardware and Sound.
❏ Windows 8.1/Windows 8/Windows Server 2012 R2/Windows Server 2012
Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound (or
Hardware).
❏ Windows 7/Windows Server 2008 R2
Click the start button, and select Control Panel > View devices and printers in Hardware and Sound.
❏ Windows Vista/Windows Server 2008
Click the start button, and select Control Panel > Printers in Hardware and Sound.
2. Right-click on your printer and select Properties.
3. Select the Web Service tab and click the URL.
Network Service and Software Information
162