Saving Received Faxes On A Computer - Epson WF-2750DWF User Manual

User's Guide
The Remote Receive feature is available for telephones that support tone dialing.
Related Information
"Receiving Faxes Manually" on page 75
&
Setting Up Remote Receive
1. Enter Setup from the home screen.
2. Select Fax Settings > Receive Settings > Remote Receive.
3. After enabling Remote Receive, enter a two digit code (0 to 9, *, and # can be entered).
4. Press the OK button.
Using Remote Receive
1. When the telephone rings, pick up the handset.
2. When you hear a fax tone, enter the start code using the telephone.
3. After confirming that the printer has started receiving the fax, hang up the handset.
Receiving Faxes by Polling (Polling Receive)
You can receive a fax stored on another fax machine by dialing the fax number. Use this feature to receive a
document from a fax information service. However, if the fax information service has an audio guidance feature
that you need to follow to receive a document, you cannot use this feature.
Note:
To receive a document from a fax information service that uses audio guidance, just dial the fax number using the connected
telephone, and operate the phone and the printer following the audio guidance.
1. Enter Fax from the home screen.
2. Press the OK button, and then enable Polling Receive.
3. Enter the fax number.
x
4. Press the button.
Related Information
"Sending Faxes Dialing from the External Phone Device" on page 73
&

Saving Received Faxes on a Computer

You can set to convert received documents into PDF format and save them on a computer connected to the printer.
You can also set to automatically print the documents while saving them on the computer.
First, you need to use FAX Utility to make the setting. Install FAX Utility on the computer.
Faxing
76