Scanning To A Computer (Wsd) - Epson WorkForce Pro WF-4720 series User Manual

User's Guide
❏ Document Direction:
Select the orientation of the original.
Clear All Settings
Resets the scan settings to their defaults.

Scanning to a Computer (WSD)

Note:
❏ This feature is only available for computers running Windows 10/Windows 8.1/Windows 8/Windows 7/Windows Vista.
❏ If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature.
1. Place the originals.
2. Tap Scan on the home screen.
3. Tap Computer (WSD).
4. Select a computer.
x
5. Tap .
Related Information
"Placing Originals" on page 49
&
Setting Up a WSD Port
This section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
The following is necessary to set up a WSD port.
❏ The printer and the computer are connected to the network.
❏ The printer driver is installed on the computer.
1. Turn the printer on.
2. Click start, and then click Network on the computer.
3. Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
Scanning
101