Making Wi-Fi Settings Manually - Epson WorkForce Pro WF-4720 series User Manual

User's Guide
Related Information
"Making Wi-Fi Settings Manually" on page 27
&
"Making Wi-Fi Settings by Push Button Setup (WPS)" on page 28
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 29
&
"Making Wi-Fi Direct (Simple AP) Connection Settings" on page 30
&

Making Wi-Fi Settings Manually

You can manually set up the information necessary to connect to an access point from the printer's control panel.
To set up manually, you need the SSID and password for an access point.
Note:
If you are using an access point with its default settings, the SSID and password are on the label. If you do not know the SSID
and password, contact the person who set up the access point, or see the documentation provided with the access point.
1. Tap on the home screen.
2. Tap the Wi-Fi(Recommended) icon or the Router icon.
3. Tap Start Setup.
If the network connection is already set up, the connection details are displayed. Tap Change to Wi-Fi
connection. or Change Settings to change the settings.
4. Tap Wi-Fi Setup Wizard.
5. Select the SSID for the access point.
Note:
❏ If the SSID you want to connect to is not displayed on the printer's control panel, tap Search Again to update the list.
Still not displayed, tap Enter Manually, and then enter the SSID directly.
❏ If you do not know the SSID, check if it is written on the label of the access point. If you are using the access point
with its default settings, use the SSID written on the label.
6. Tap the Enter Password field, and then enter the password.
Note:
❏ The password is case-sensitive.
❏ If you do not know the password, check if it is written on the label of the access point. If you are using the access point
with its default settings, use the password written on the label. The password may also be called a "Key", a
"Passphrase", and so on.
❏ If you do not know the password for the access point, see the documentation provided with the access point, or
contact the person who set it up.
Network Settings
27