Web Service Settings - Epson WorkForce Pro WF-4720 series User Manual

User's Guide
Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used, Wi-
Fi connections are disabled.
Network Status:
Displays or prints the current network settings.
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Make the following detailed settings.
❏ Device Name
❏ TCP/IP
❏ Proxy Server
❏ Email Server
❏ IPv6 Address
❏ MS Network Sharing
❏ Link Speed & Duplex
Related Information
"Making Wi-Fi Settings Manually" on page 27
&
"Making Wi-Fi Settings by Push Button Setup (WPS)" on page 28
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 29
&
"Making Wi-Fi Direct (Simple AP) Connection Settings" on page 30
&
"Printing a Network Status Sheet" on page 37
&
"Checking the Network Connection Status" on page 32
&
"Changing the Network Connection to Ethernet from the Control Panel" on page 40
&
"Making Advanced Network Settings" on page 31
&

Web Service Settings

Select the menus on the control panel as described below.
Settings > General Settings > Web Service Settings
Epson Connect Services:
Displays whether the printer is registered and connected to Epson Connect.
You can register to the service by tapping Register and follow the instructions.
When you have registered, you can change the following settings.
❏ Suspend/Resume
❏ Unregister
Menu Options for Settings
157