WF-3720/WF-4720/WF-4730/WF-4740 Series
Start Here
Read these instructions before using your product.
The illustrations show the WF-4740, but the steps are the same
for all models, unless otherwise specified.
Note for Spanish speakers/Nota para hispanohablantes:
Para obtener instrucciones de configuración en español, visite la página
de soporte de su producto en www.epson.com/support (EE.UU.) o
www.epson.ca/support (Canadá) y consulte la Guía de instalación
(requiere una conexión a Internet).
1
Unpack
Note:
Do not open the ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit until it locks and remove all
protective materials from inside the product.
3
Lower the scanner unit.
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Raise the control panel and turn on the product.
3
Select your language, country, and time.
Note:
You can change these settings later using the product's
control panel. For more information, see the online User's Guide.
3
Install ink cartridges
Caution:
Keep the ink cartridges out the reach of children and do not
drink the ink.
1
Lift up the scanner unit until it locks.
Caution:
Do not touch the flat, white cable.
2
Gently shake the ink cartridges.
3
Unpack the ink cartridges.
Need help?
Do you have a question about the WF-3720 Series and is the answer not in the manual?
Questions and answers
I have 8 documents in Que that wont print, suggestions ??
To troubleshoot print queue issues with the Epson WF-3720 Series, follow these steps:
1. Make sure the printer is turned on.
2. Check that the printer is securely connected to the computer via USB or network.
3. Cancel the current print job if needed.
4. Ensure the correct printer is selected in the print dialog.
5. If nothing prints, verify that the printer icon appears in the Windows taskbar.
6. If necessary, restart the computer and printer to reset the print queue.
This answer is automatically generated