Details Of Service Mode - Canon iPF6100 Service Manual

Chapter 7

7.1.10 Details of Service Mode

iPF6000S
This section provides details of the Service mode menu.
a) DISPLAY
Displays and prints the printer information.
1) PRINF INF
Prints adjustment values in the User menu, [DISPLAY] and [COUNTER] parameters on A4-size or lager paper.
When roll media is used, the layout is optimized according to the media width.
2) SYSTEM
Displays the printer information shown below.
Display
S/N
TYPE
LF TYPE
TMP
SIZE LF
SIZE LF
SIZE CR
SIZE CR
3) HEAD
Displays the following EEPROM information of the printhead.
S/N R
S/N L
LOT R
LOT L
4) INK
Displays the numbers of days passed since installation of the following ink tanks.
Display
BK
MBK
C
M
Y
PC
PM
GY
5) WARNING
Displays the warning history (up to 20 events). The newest event has the smallest history number.
6) ERROR
Displays the error history (up to 20 events). The newest event has the smallest history number.
7) INK CHECK
Displays the number of times the remaining ink level detection function was turned off, to accommodate refilled ink cartridges in the order of PC, C, PM, Y, GY,
BK, MBK, and M.
0: Never
1: Executed at least once
7-50
Serial number of printer
Type setting on main controller PCB
* iPF6000S is represented by 24.
Feed roller type: 0 or 1
Ambient temperature
Detected size of loaded media (feed direction)
0 is always detected for the roll media.
Detected size of loaded media (feed direction)
0 is always detected for the roll media.
Detected size of loaded media (carriage scan direction)
Detected size of loaded media (carriage scan direction)
Display
Serial number of printhead R
Serial number of printhead L
Lot number of printhead R
Lot number of printhead L
Number of days passed since the BK ink tank was installed
Number of days passed since the MBK ink tank was installed
Number of days passed since the C ink tank was installed
Number of days passed since the M ink tank was installed
Number of days passed since the Y ink tank was installed
Number of days passed since the PC ink tank was installed
Number of days passed since the PM ink tank was installed
Number of days passed since the GY ink tank was installed
T-7-86
Description
T-7-87
Description
T-7-88
Description
Unit
-
-
-
degrees C
mm
inch
mm
inch
Unit
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
0020-7352