4) Remove all connectors from the main controller PCB.
5) Remove the two screws[1] to remove the HDD expansion PCB[2], and then remove the screw[3].
6) Remove the ten screws[1] and free the harness from harness guide[2] to remove the main controller PCB[3].
b) Removing the main controller mounting plate
1) Remove the main controller PCB.
2) Free the harness from the harness guide.
3) Remove the screw [1] and remove the flexible guide [2].
[1]
[3]
F-4-160
[3]
[1]
[1]
F-4-161
[1]
F-4-162
[2]
[1]
[2]
[2]
Chapter 4
4-73