Details Of Service Mode - Canon iPF700 Series Service Manual

7.1.3 Details of Service Mode

This section provides details of the Service mode menus.
a. DISPLAY
Displays and prints the printer information.
(1) PRINF INF
Prints adjustment values in the User menu an all of DISPLAY and COUNTER parameters on A4-size or lager paper.
When a roll media is used,the layout is optimized according to the media width in order to save paper.
(2) SYSTEM
Displays the printer information shown below.
Display
S/N
TYPE
LF TYPE
TMP
SIZE LF
SIZE CR
(3) HEAD
Displays the following EEPROM information in the printhead.
(4) INK
Displays the numbers of days passed since installation of the following ink tanks.
If any ink tank that does not allow the printer to count the number of days passed is installed,an error message is displayed.
(5) WARNING
Displays the warning history(up to 20 events). The newest event has the smallest history number.
(6) ERROR
Displays the error history(up to 20 events). The newest event has the smallest history number.
(COUNTER)
SETTING
INITIALIZE
Description
Serial number of printer
Type setting on main controller PCB
* iPF700 is represented by 36.
Feed roller type
Ambient temperature
Detected size of loaded media (feed direction)
0 is always detected for the roll media.
Detected size of loaded media (carriage direction)
Display Description
S/N Serial number of printhead
LOT Lot number of printhead
Display Description
BK Number of days passed since the BK ink tank was installed
MBK Number of days passed since the MBK ink tank was installed
MBK2 Number of days passed since the MBK2 ink tank was installed
C Number of days passed since the C ink tank was installed
M Number of days passed since the M ink tank was installed
Y Number of days passed since the Y ink tank was installed
Pth
ON
OFF
RTC
DATE
TIME
WARNING
ERROR
ADJUST
W-INK
CARRIAGE
PURGE
INK-USE CNT
CUTTER-CHG CNT
W-INK CHG CNT
HEAD-CHG CNT
PARTS-CHG CNT
PARTS A1
PARTS B1
PARTS D
PARTS M1
PARTS COUNTER
PARTS A1
PARTS B1
PARTS D
PARTS M1
F-7-5
T-7-1
T-7-2
T-7-3
Unit
-
-
0 or 1
C
mm/inch
mm/inch
Unit
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
Chapter 7
0013-7791
7-5