Errors - Canon iPF6100 Service Manual

8.3.3 Errors

iPF6300 / iPF6350 / iPF6300S
* Codes represent the numbers that are displayed in DISPLAY in service mode.
If the same message is displayed when the printer is turned off, then back on, take action as recommended in the Action column.
Display massage
Problem with Printhead
Chk printing results
Problem with Printhead R
Chk printing results
Problem with Printhead L
Chk printing results
Move the blue platen switch
No.02 to the right.
Move the blue platen switch
No.03 to the right.
Move the blue platen switch
No.04 to the right.
Move the blue platen switch
No.05 to the right.
Move the blue platen switch
No.06 to the right.
Move the blue platen switch
No.07 to the right.
Move the blue platen switch
No.08 to the right.
Move the blue platen switch
No.09 to the right.
Move the blue platen switch
No.10 to the right.
Move the blue platen switch
No.11 to the right.
Move the blue platen switch
No.12 to the right.
Move the blue platen switch
No.13 to the right.
Move the blue platen switch
No.14 to the right.
Paper size not detected.
Reload paper.
Code*
01800500-1010 The number of the printhead's non-discharge nozzle
was over fixed level during the non-discharge
detection operation.
01800500-1012 The number of the right printhead's non-discharge
nozzle was over fixed level during the non-discharge
detection operation.
01800500-1013 The number of the left printhead's non-discharge
nozzle was over fixed level during the non-discharge
detection operation.
01861007-1056 The platen shutter switch No.2 has been closing when
shutter is the mode of opening.
01861008-1057 The platen shutter switch No.3 has been closing when
shutter is the mode of opening.
01861009-1058 The platen shutter switch No.4 has been closing when
shutter is the mode of opening.
0186100A-1059 The platen shutter switch No.5 has been closing when
shutter is the mode of opening.
0186100B-105A The platen shutter switch No.6 has been closing when
shutter is the mode of opening.
0186100C-105B The platen shutter switch No.7 has been closing when
shutter is the mode of opening.
0186100D-105C The platen shutter switch No.8 has been closing when
shutter is the mode of opening.
0186100E-105D The platen shutter switch No.9 has been closing when
shutter is the mode of opening.
0186100F-105E The platen shutter switch No.10 has been closing
when shutter is the mode of opening.
01861010-105F The platen shutter switch No.11 has been closing
when shutter is the mode of opening.
01861011-1060 The platen shutter switch No.12 has been closing
when shutter is the mode of opening.
01861012-1061 The platen shutter switch No.13 has been closing
when shutter is the mode of opening.
01861013-1062 The platen shutter switch No.14 has been closing
when shutter is the mode of opening.
03010000-200A Unable to detect the paper width (Paper loaded at an
improper position)
T-8-7
Condition detected Action
Clean the printhead.
Replace the printhead.
Clean the printhead.
Replace the right printhead.
Clean the printhead.
Replace the left printhead.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Check the opening or closing of the platen shutter
switch.
Check the platen and multi sensor and surrounding
parts.
Replace the multi sensor.
Reload the paper
Chapter 8
0024-9331
8-29