Error Code List - Canon iPF6100 Service Manual

Chapter 8

8.3.2 Error Code List

iPF6200 / iPF6000S
* Codes represent the numbers that are displayed in DISPLAY in service mode.
If the same message is displayed when the printer is turned off, then back on, take action as recommended in the Action column.
Display massage
Clean right P Head
Press Online to
clear error.
Clean left P Head
Press Online to
clear error.
PHeads: wrong pos.
Open top cover and
check the
printhead positions.
No right printhead
Install right
printhead.
No left printhead
Install left
printhead.
Paper size not
detected.
Press Load/Eject
and reload the
paper.
Paper size not
detected.
Press Load/Eject
and reload the
paper.
Paper size not
detected.
Press Load/Eject
and reload the
paper.
Paper size not
detected.
Press Load/Eject
and reload the
paper.
Cannot adjust
printhead.
Press Online to
clear the error
and readjust
printhead.
Cannot adjust
printhead.
Press Online to
clear the error
and readjust
printhead.
Hardware error.
03010000-2823
Turn off printer,
wait, then
turn on again.
Cannot print
as specified.
Press Load/Eject
and replace paper
with A4/LTR
(vertical) or larger
8-18
Code*
03800501-280D Printhead R found to have many non-
discharging nozzles during a non-
discharging inspection (printing paused)
03800502-280E Printhead L found to have many non-
discharging nozzles during a non-
discharging inspection (printing paused)
03800201-2804 Printheads L and R installed in reverse
03800202-2807 position
03800101-2800 Printhead R not found
03800102-2808 Printhead L not found
03010000-200C Unable to detect the leading end of
paper
03010000-200D Unable to detect the trailing end of cut
sheet
03010000-2017 Paper (right) edge detection error
03010000-2018 Paper (left) edge detection error
03010000-2820 Printhead registration unadjustable
03010000-2821 LF unadjustable
03010000-2823 Printhead check error
03010000-2E1F Undersized paper loaded for internal
printing (A4 or larger)
T-8-6
Condition detected
Clean the printheads. Identify the nozzles in a nozzle
check pattern. Replace the printheads.
Reinstall the printheads in correct position.
Install a printhead on the R side.
Install a printhead on the L side.
Check the leading end of paper. Reload the paper.
Check the sheet length. Check to see if paper has not
jammed.
Check the right edge of paper. Check the paper type.
Check the left edge of paper. Check the paper type.
Check the paper on which a pattern is printed for
smears.
Check the environment for interferences from outside
light.
Clean the printheads.
Check the paper on which a pattern is printed for
smears.
Check the environment for interferences from outside
light.
Clean the printheads.
Check to see if paper has not jammed.
Check the paper on which a pattern is printed for
smears.
Replace with A4/Letter or any larger-sized paper.
Action
0020-2109