This printer has four vent holes, [1] to [4]. Do not block the vent holes when the printer is in service.
4. Contact of Linear Scale/Carriage Shaft
Do not touch the linear scale and carriage shaft when the upper cover is opened, for maintenance.
Touching the linear scale and carriage shaft might cause abnormal movement of the carriage and produce defective prints.
[1] Linear Scale
[2] Carriage Shaft
5. Handling the Maintenance Cartridge
When removing the maintenance cartridge from the printer, use caution so that waste ink does not spatter.
6. Refilling the Printer with Ink
After draining the ink from inside the printer using the automatic or manual ink draining procedure for disassemble/reassemble or transport the printer, refill the
printer with ink as soon as possible upon completion of the work.
Dried remaining ink on the surface of some components, may cause damage or abnormal operations.