Canon iPF6100 Service Manual page 610

Ipf6000 series
Hide thumbs Also See for iPF6100:
Table of Contents

Advertisement

Chapter 7
- Press
key to exit the CA certificate expiration date display screen and go back to the top of [VALIDITY] menu.
7) Deleting the CA Certificate [CA-KEY]
For the secure communication between the device (e-RDS) and the UGW, an authentication technology from a certification authority is used. A license has been
issued from the certification authority. For this reason, the devices are shipped with the CA (Certificate Authority) certificate enabled in advance to prove the license
obtained.
The device (e-RDS) uses this CA certificate to communicate with the UGW, thus CA must not be deleted.
Therefore, usually, the setup is not necessary.
* If you delete the CA certificate under a special instruction, perform the following procedure.
(1) In service mode, referring to the "Service Mode Menu Tree", go to [CA-KEY] menu using
(2) Choose between YES/NO using
- Press [OK] key, and "=" will appear and the initializing process will begin.
[NO]: Do not delete the CA certificate. Default value is [NO].
[YES]: Delete the CA certificate.
7-100
C A - K E Y
N O
and
keys, and press [OK] key to set.
C A - K E Y
= Y E S
key and
F-7-77
F-7-78
key.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ipf6300Ipf6000sIpf6300sIpf6200Ipf6350

Table of Contents