(2) Unpack the printer and remove the packaging material.
(3) Grasaping the carrying handles [1] on the left and right side of the bottom, place the printer on a level place such as a table.
(4) The Roll Feed Unit [1] is preinstalled on the printer. Peel away the tape and remove the Roll Holder [2] and protective material from the Roll Feed Unit. Also
remove the tape on the two Holder Stoppers attached to the Roll Holder, and then remove the Holder Stoppers [3] from the Roll Holder.
(5) Remove the tape and other packaging material used to secure the printer and accessories. Remove the tape and protective material on the Top Cover [1] and
Ejection Guide [2]. After removing the tape and protective material on the Ejection Guide, reinstall it.