Details Of Service Mode - Canon iPF8400S Service Manual

7.1.3 Details of Service Mode

This section provides details of the Service mode menu.
a) DISPLAY
Displays and prints the printer information.
1) PRINF INF
Prints adjustment values in the User menu, [DISPLAY] and [COUNTER] parameters on A4-size or lager paper.
When roll media is used, the layout is optimized according to the media width.
2) SYSTEM
Displays the printer information shown below.
Display
S/N
TYPE
LF TYPE
TMP
RH
SIZE LF
SIZE CR
AFTER
INST.
3) HEAD
Displays the following EEPROM information of the printhead.
S/N R
S/N L
LOT R
LOT L
4) INK
Displays the numbers of days passed since installation of the following ink tanks.
Display
BK
MBK
C
M
Y
PC
PM
GY
5) WARNING
Displays the warning history (up to 20 events). The newest event has the smallest history number.
6) ERROR
Displays the error history (up to 20 events). The newest event has the smallest history number.
7) JAM
Displays log of jams that have occurred (up to five events). The newest event has the smallest history number.
Indicates the date and time of jam and error code. "0000" is displayed if there is no log.
Press the key to display detail information.
Press the key or key to navigate among detail information display 1 to 4.
Detail information display 1
Serial number of printer
Type setting on main controller PCB
* iPF8400S/8410S are represented by 44".
Feed roller type: 0 or 1
Ambient temperature
Ambient humidity
Detected size of loaded media (feed direction)
0 is always detected for the roll media.
Detected size of loaded media (carriage scan direction)
Number of days since initial installation
Display
Serial number of printhead R
Serial number of printhead L
Lot number of printhead R
Lot number of printhead L
Number of days passed since the BK ink tank was installed
Number of days passed since the MBK ink tank was installed
Number of days passed since the C ink tank was installed
Number of days passed since the M ink tank was installed
Number of days passed since the Y ink tank was installed
Number of days passed since the PC ink tank was installed
Number of days passed since the PM ink tank was installed
Number of days passed since the GY ink tank was installed
0 1
X X X X -
J A M 0 1
1 : X X X X X X X X X
1 2 3 4 5 6 7 8 9
Description
Description
Description
M M / D D H H :
X X X X
F-7-1
X
10
F-7-2
Unit
-
-
-
centigrade
degrees
%
mm/inch
mm/inch
Days
Unit
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
Day(s)
M M
Chapter 7
0030-4817
7-11