03810108-250C/03810109-250B/03810112-2504/03810113-2505/03810115-2509 No Ink Error; The Ink Tank Is Replaced.); 03810109-250B/03810112-2504/03810113-2505/03810115-2509 No Ink Error - Canon iPF6100 Service Manual

5. Replace the main controller PCB.
6.1.3.28 03810101-2501/03810102-2502/03810103-2503/03810104-2500/03810105-2508/03810106-2506/03810107-250A/

03810108-250C/03810109-250B/03810112-2504/03810113-2505/03810115-2509 No ink error

iPF6000
<Cause>
No ink status was detected in the ink tank.
<Probable fault location>
Ink tank, ink tank unit, or main controller PCB
<Countermeasure>
1. Replace the ink tank.
2. Replace the ink tank unit.
3. Replace the main controller PCB.
6.1.3.29 03830101-2521/03830104-2520/03830102-2522/03830103-2523/03830112-2524/03830113-2525/03830106-2526/
03830105-2528/03830115-2529/03830107-252A/03830109-252B/03830108-252C Ink tank is not installed.(This error
occurs when the ink tank is replaced.)
iPF6000
<Cause>
When the ink tank was replaced, the closed state of the ink cover was detected with the ink tank removed.
<Probable fault location>
Operation method, ink tank, ink tank cover sensor, ink tank unit, or main controller PCB
<Countermeasure>
1. Operation check
Install the ink tank.
2. Visual check
Remove foreign substances from the ink tank contacts and ink cover sensor if any.
3. Replace the ink tank.
4. Ink tank cover sensor
Check for normal operation. If the operation is abnormal, replace the ink tank cover sensor.
5. Cable continuity check
If continuity of the cable between the ink tank cover sensor and the main controller PCB is abnormal, replace the cable.
6. Replace the ink tank unit.
7. Cable continuity check
If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable.
8. Replace the main controller PCB.
6.1.3.30 03830201-2541/03800204-2540/03830202-2542/03830203-2543/03830212-2544/03830213-2545/03830206-2546/
03830205-2548/03830215-2549/03830207-254A/03830209-254B/03830208-254C Invalid ink tank ID
iPF6000
<Cause>
The installed ink tank is wrong
<Probable fault location>
Ink tank, ink tank unit, or main controller PCB
<Countermeasure>
1. Replace the ink tank.
2. Replace the ink tank unit.
3. Replace the main controller PCB.
6.1.3.31 03830301-2561/03830304-2560/03830302-2562/03830303-2563/03830312-2564/03830313-2565/03830306-2566/
03830305-2568/03830305-2568/03830315-2569/03830307-256A/03830309-256B/03830308-256C Ink tank EEPROM error
iPF6000
<Cause>
An ink tank EEPROM checksum error was detected.
<Probable fault location>
Ink tank, ink tank unit, or main controller PCB
<Countermeasure>
1. Replace the ink tank.
2. Replace the ink tank unit.
3. Cable continuity check
If continuity of the cable between the ink tank unit and the main controller PCB is abnormal, replace the cable.
4. Replace the main controller PCB.
6.1.3.32 03841001-2819/03841201-2816/03841201-2817/03841101-2818/01841001-281B Maintenance cartridge error
iPF6000
Chapter 6
0012-6630
0012-9360
0013-2115
0013-2116
0012-6640
6-9