Canon iPF6100 Service Manual page 117

First Level
[Interface Setup] [TCP/IP]
[NetWare]
[AppleTalk]
[Ethernet Driver]
[Init. Settings]
[Maintenance] [Repl. maint. cart.]
T-1-56
Second Level Third Level
[Protocol] (*4)
[IP Setting] (*14)
[NetWare]
[Frame Type] (*6)
[Print Service] (*6)
[On]
[Off]*
[Auto Detect]
[Comm.Mode] (*7)
[Ethernet] (*7)
[Spanning Tree]
[MAC Address]
[No]*
[Yes]
[No]
[Yes]
Fourth Level
[BOOTP] [On]
[Off]*
[RARP] [On]
[Off]*
[IP Address] 0.0.0.0* to 255.255.255.255
[Subnet Mask] 0.0.0.0* to 255.255.255.255
[Default G/W] 0.0.0.0* to 255.255.255.255
[On]
[Off]*
[Auto Detect]
[Ethernet 2]
[Ethernet 802.2]*
[Ethernet 802.3]
[Ethernet SNAP]
[BinderyPServer]
[RPrinter]
[NDSPServer]*
[NPrinter]
[On]
[Off]*
[Half Duplex]*
[Full Duplex]
[10 Base-T]*
[100 Base-TX]
[Not Use]*
[Use]
Chapter 1
Fifth Level
1-99