Chapter 4
4.3.12 Roll Feed Unit
iPF6100 / iPF6200 / iPF6000S / iPF6300 / iPF6350 / iPF6300S
a) Removing the roll motor
1) When removing the roll motor, remove the roll feed unit[2] from the main body, and then remove the right cover[3] by removing the two screws[1].
2) Remove the four screws[1], and then remove the left cover[2] and paper tray[3].
3) Remove the three screws[1], and then remove the right inner cover[2].
4-46
[1]
[2]
[3]
F-4-101
[1]
[3]
[2]
F-4-102
[1]
F-4-103
[2]
0013-4377