03130031-2F26/03130031-2F27 Carriage Motor Error; 03130031-2F2A Feed Roller Home Position Error; 03130031-2F2D The Cassette Cannot Work; 03130031-2F2E Roll Drive Time-Out Error - Canon iPF6100 Service Manual

6.1.3.20 03130031-2F26/03130031-2F27 Carriage motor error

iPF6000
<Cause>
The carriage did not operate because the carriage motor was overloaded due to a physical cause such as a jam.
The carriage motor did not reach the specified time.
<Probable fault location>
Carriage path way, carriage rail, carriage belt, linear scale, linear encoder, carriage motor, carriage PCB, or main controller PCB.
<Countermeasure>
1. Carriage pathway check
Remove foreign substances(jammed paper) from the carriage pathway if any.
2. Carriage rail
Visually check whether the carriage rail is dirty. If the carriage rail is dirty, clean it using rail cleaner.
3. Carriage belt
Visually check whether the carriage belt is loose.If the carriage belt is loose, remove it and then reinstall it.
4. Replace linear scale
5. Replace liner encoder
6. Cable continuity check
If continuity of the cable between the linear encoder and the main controller PCB is abnormal, replace the cable.
7. Replace carriage motor
8. Cable continuity check
If continuity of the cable between the carriage motor and the main controller PCB is abnormal, replace the cable.
9. Replace the carriage PCB
10. Cable continuity check
If continuity of the cable between the carriage PCB and the main controller PCB is abnormal, replace the cable.
11. Replace the main controller PCB.

6.1.3.21 03130031-2F2A Feed roller home position error

iPF6000
<Cause>
During power-on, the feed roller HP sensor could not detect that the reference of Scale that exists on encoder film area color change from transparent to black.
<Probable fault location>
Feed roller encoder film, feed roller HP sensor, feed motor, or main controller PCB
<Countermeasure>
1. Visual check
If the feed roller encoder film is damaged, replace it. Remove foreign substances from the feed roller encoder film if any.
2. Feed roller HP sensor
Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation. If the operation is abnormal, replace the feed roller HP sensor.
3. Cable continuity check
If continuity of the cable between the feed roller HP sensor, feed motor and the main controller PCB is abnormal, replace the cable.
4. Replace the feed motor.
5. Replace the main controller PCB.

6.1.3.22 03130031-2F2D The cassette cannot work.

iPF6000
<Cause>
The cassette cannot work.
<Probable fault location>
pressure plate arm, cassette cam sensor, cassette motor, or main controller PCB
<Countermeasure>
1. Visual check
If the pressure plate arm is abnormal, replace the pressure plata arm.
2. Cassette cam sensor
Select [SERVICE MODE]>[I/O DISPLAY] to check for normal operation, If the operation is abnormal, replace the valve motor.
3. Cable continuity check
If continuity of the cable between the cassette cam sensor, cassette motor and the main controller PCB is abnormal, replace the cable.
4. Replace the cassette motor.
5. Replace the main controller PCB.

6.1.3.23 03130031-2F2E Roll drive time-out error

iPF6000
<Cause>
The roll cam sensor home position in roll feed unit could not be detected within the specified time.
<Probable fault location>
roll cam drive unit, roll cam sensor, roll motor, Connector, roll feed unit PCB, or main controller PCB
<Ountermeasure>
1. Visual check
If the gear in roll cam drive unit is abnormal, replace the gear.
2. Roll cam sensor
Chapter 6
0012-9500
0012-6651
0013-3855
0013-3857
6-7