Canon iPF6100 Service Manual page 585

Detail information display 1
Detail information display 2
Detail information display 3
Detail information display 4
Display Description
1 Jam type
2 Media
3 Jam timing
4 Media width detection
5 Head height
6 (Not Used)
7 (Not Used)
8 Environment
9 Borderless printing setting
10 Spur position
11 Print mode
12 Media width
13 Media name
8) INK CHECK
Displays the number of times the remaining ink level detection function was turned off, to accommodate refilled ink cartridges in the order of GY, MBK, PC, Y,
C, M, PM and BK.
0: Never
1: Executed at least once
J A M 0 1
1 : X X X X X X X X X
1 2 3 4 5 6 7 8 9
F-7-22
J A M 0 1
2 : X X X X X X X X X
11
F-7-23
J A M 0 1
3 : X X X X
12
F-7-24
J A M 0 1
4 : X X X X X X X X
13
F-7-25
T-7-149
1:Carriage error, 2:Jam, 3:Feed failure (delay), 4:Cut failure, *:Unknown
1:Roll media, 2:Cut sheet (manual feed from top), 3:Cut sheet (manual feed from front), 4:Cassette, *:Unknown
1:Feed, 2:Print, 3:Eject, *:Unknown
1:ON, 2:OFF, *:Unknown
0:SL (1.0mm), 1:L (1.4mm), 2:M1 (1.8mm), 3:M2 (2.0mm), 4:M3 (2.2mm), 5:H (3.2mm), *:Unknown
-
-
Display Media Information Tool's environment settings A to F according to Temperature/Humidity Detection Sensor
0: A, 1:B, 2:C, 3:D, 4:E, 5:F, *:Unknown
1:Bordered printing, 2:Borderless printing, *:Unknown
1:Top, 2:Down, *:Unknown
Display print mode, *:Unknown
Display media width, *:Unknown
Display media name, *:Unknown
X
10
LCD display contents
Chapter 7
7-75