How To Upgrade Firmware - Roland Color Camm Pro PC-60 Service Notes

4-5 HOW TO UPGRADE FIRMWARE

Connect PC and PC-60 with the PARALLEL CABLE.
1
It is necessary to prepare the followings to
upgrade the FIRMWARE.
1. FIRMWARE DISK
2. PC with MS-DOS
3. PARALLEL CABLE
Turn on the MAIN POWER SW while pressing [
2
[ ] keys.
It is ready to receive data when [CARTRIDGE HOLDER 1]
LED become ON and [CARTRIDGE HOLDER 2] LED
blinks.
Open the download.bat from MS-DOS. (Type download
3
and press [RETURN] key.)
Some PCs can not use the BAT FILE. Please
refer to the ReadMe File in the FIRMWARE
DISK.
Turn off the MAIN POWER SW to end when all
4
[CARTRIDGE HOLDER] LEDs blink.
], [ ],
4 Adjustment
4
45