Roland Color Camm Pro PC-60 Service Notes page 92

6 Trouble Shooting
CUT SHIFTS FROM PRINTING
CUT LINE
Is the media set correctly?
YES
6
Has the media been accommodated in
environment?
YES
Is the Print/Cut Offset correct?
YES
Is the holder part of TOOL CARRIAGE
loose?
NO
Is the TOOL CARRIAGE loose?
88
NO
Set the media correctly.
NO
Accommodate media in environment.
NO
Adjust Print/Cut Offset.
YES
Fix the holder to TOOL CARRIAGE.
YES
Fix the TOOL CARRIAGE.
RAINBOW LINE BETWEEN BANDS
RAINBOW LINE
BLURRED PRINT
NO
Is THERMISTOR OK?
YES
NO
Is the HEAD VOLTAGE OK?
YES
NO
Is the DENSITY ADJUSTMENT OK?
YES
Life of the HEAD. Replace the HEAD
CARRIAGE.
NO
Is the PLATEN DAMPER flat and smooth?
YES
NO
Is the HEAD DENSITY ADJUSTMENT
OK?
YES
NO
Is the HEAD POSITION adjusted
properly?
YES
Life of the HEAD. Replace the HEAD
ASSEMBLY.
Replace the CARRIAGE BOARD or
HEAD CARRIAGE.
Adjust HEAD VOLTAGE.
Adjust HEAD DENSITY.
Replace PLATEN DAMPER.
Adjust HEAD DENSITY ADJUSTMENT.
Adjust HEAD POSITION.