Roland Color Camm Pro PC-60 Service Notes page 72

4 Adjustment
Turn on the MAIN POWER SW while pressing [POWER],
2
[SHEET TYPE] and [BASE POINT] keys and enter the
FACTORY MODE.
Select [CARTRIDGE HOLDER 6] with [
and press [SHEET TYPE] key to enter the CARTRIDGE
POSITION ADJUSTMENT MODE.
4
Keep pressing the [POWER] key to enter the
3
ADJUSTMENT MODE.
During the ADJUSTMENT MODE, [POWER] LED will
blink and both [PIECE] and [ROLL] LEDs will be ON.
Close the FRONT COVER.
4
Move the HEAD CARRIAGE with [
that the white gear comes to the center of the CARTRIDGE
HOLDER.
Press the [SHEET TYPE] key to save the settings.
Open the FRONT COVER.
5
Then, press the [POWER] key to return to the TEST
MODE.
During the TEST MODE, [POWER] LED will be ON and
either [PIECE] or [ROLL] LED will blink.
68
] or [ ] keys
] and [ ] keys so
HEAD
CARRIAGE
To enter
For selection
CARTRIDGE HOLDER WHITE GEAR