How To Upgrade Firmware - Roland SP-300 Service Manual Book

4-3 HOW TO UPGRADE FIRMWARE (Referential Time : 5min.)
Connect the PC that the SP-300 windows driver is
1
installed in and SP-300 with a USB CABLE.
It is necessary to prepare the followings to
upgrade the FIRMWARE.
1. Firmware Disk
2. Windows PC (OS Windows2000/XP)
* The SP-300 windows driver needs to be
installed in the PC.
3. Peck.exe
4. USB cable
Confirm that main power of SP-300 is turned "on "
2
and sub power of SP-300 is turned "off".
Double-click Peck.exe to start the Peck.
3
[Peck] screen is displayed.
Click [Select Port] button.
[Select Port] screen is displayed.
4
Select [SP-300] in the [Product] column.
Confirm that [via USB] is checked.
Click [OK].
4 Adjustment
4
4-15