Roland Color Camm Pro PC-60 Service Notes page 70

4 Adjustment
Set the BLACK RIBBON CARTRIDGE, MEDIA and 0.2
2
mm CERAMIC PEN on the machine.
Other RIBBON CARTRIDGE except the
BLACK can not be used.
4
Turn on the MAIN POWER SW while pressing [POWER],
3
[SHEET TYPE] and [BASE POINT] keys and enter the
FACTORY MODE.
Select [CARTRIDGE HOLDER 1] with [
and press [SHEET TYPE] key to enter the PRINT/CUT
OFFSET ADJUSTMENT MODE.
Lower the SHEET LOADING LEVER and close the
4
FRONT COVER. Keep pressing the [POWER] key until
the [POWER] LED starts blinking.
CROP MARK will be printed and the TOOL CARRIAGE
will move close to the CROP MARK.
Open the FRONT COVER.
5
Move the TOOL CARRIAGE with the cursor keys so that
the pen tip will come right onto the CROSS of the CROP
MARK when pushing it down with your finger.
Press the [SHEET TYPE] key to save the settings.
Turn off the MAIN POWER SW to end.
66
] or [ ] keys
To enter
For selection
CROP MARK
CROP MARK