Roland Color Camm Pro PC-60 Service Notes page 78

4 Adjustment
Raise the SHEET LOADING LEVER and select the
6
ADJUSTMENT MODE.
Keep pressing the [POWER] key until the [POWER] LED
starts blinking to enter the ADJUSTMENT MODE.
PRINTING MODE : [POWER] LED ON.
ADJUSTMENT MODE : [POWER] LED BLINKS.
4
Current settings can be checked by pressing the [CUT
7
TEST] key.
And also, settings can be changed back to the default by
pressing the [BASE POINT] key.
Enter the amount to be compensated with [
8
keys.
Press the [SHEET TYPE] key to save the settings.
RANGE : -20 STEP — +20 STEP
UNIT :
The parameters for the GRIT COMPENSATION is put on
9
the GUIDE RAIL.
Grit Distance : +8
Eccentricity : Amount- 0
Head ID : B06-0032
Density Adjust : +1 +1
: 0
Stitch Adjust : Upper= 0
74
] and [
1STEP = 0.03%
Number= 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 -1
Lower= 0
[CARTRIDGE HOLDER] LED
1
2
3
]
0 0 0
0 0 -1
MEANING
OFF : +
ON : -
Blinks for amount of the 10th digit.
Blinks for amount of the 1st digit.