Stitching Adjustment - Roland Color Camm Pro PC-60 Service Notes

4 Adjustment

4-18 STITCHING ADJUSTMENT

STITCHING ADJUSTMENT SHOULDN'T BE PERFORMED FOR ORDINARY SERVICE.
This adjustment can decrease or increase the printing density of top and bottom edges of the BAND for a
purpose of reducing the BANDING PROBLEM or WHITE LINE between the BANDs.
However, the adjustment procedure has not been established perfectly, yet.
Therefore, this procedure is tentative and should be followed only when BANDING PROBLEM or
WHITE LINE between the BANDs can not be reduced by performing other measures.
WHAT IS STITCHING ADJUSTMENT?
As it is mentioned in THERMAL HEAD DENSITY ADJUSTMENT MODE, heating time for each
GROUP can be adjusted separately by deviding the HEAD to 30 groups.
STITCHING ADJUSTMENT is for changing the heating time of the group used for printing the top and
bottom edge of the BAND.
4
192 dots (Dots used for printing)
DARK
Groups to be adjusted.
1 group = 8dots
HEAD
240 dots
LIGHT
77